EOL – Wheel Alignment System
End of the Line – Wheel Alignment System for Multi-Axle Trucks, Buses & Trailers.
- World’s 1st 3D Wheel Aligner for Multi-Axle Trucks, Buses & Trailers.
- With Innovative Image Processing technology the Drive through version of JUMBO 3D Super customized with provision for Simultaneous alignment upto 6 Axles is a perfect solution for End of the Line (EOL) – Wheel Alignment.
- One shot run-out compensation of all the 6 Axles.
- One shot Caster swing for Twin steer axles.
- Measures all the 6 axles within 3 minutes.
- No Electronics on Wheels hence less failure & Maintenance.
- Magnetic Wheel Brackets enables the user for quick clamping of wheels , hence reduced cycle time & Higher Productivity.
- Software guided process sequence avoiding manual interference.
- Automatic data pushing to Manufacturer Engineering System (MES).
- Barcode scanner provided for scanning the Vehicle Identification Number (VIN) which is used for quick & Easy retrieval of specification from the stored database.
- Extra monitor provided to view screen underneath from the PIT.
- Smart control using Wi-Fi enabled tablet & Mobile device to display alignment results and to operate the PC from Alignment bay, Avoids multiple trips to PC console.
FEATURES
- Innovative Image-Processing Technology
- One Shot Run out Compensation
- No Electronics on Wheels
- Robust Rotary Plates
- One Shot Caster Swing for Twin Steer Axles
- Parallelism Adjustment
- Thrust / Scrub Angle Adjustment
- Universal Wheel Bracket
- Smart Support without Internet (Optional)
Jumbo 3D uses latest, innovative, digital-imaging technology using 4 digital cameras for data-acquisition. High resolution 10 Megapixel digital cameras operate with intelligent software & capture seamless images of targets
Jumbo 3D Super 6A uses 12 target plates at a time to measure simultaneous Run out
No expensive service bills if accidentally target plate is dropped
Calibration not required
Free from battery discharge issues
Compact and light weight
4 Nos Rotary Plates capable of handling multi- axle Bus / Trucks capable of handling 7 tons capacity.
Caster swing can be performed for twin steer axles simultaneously.
Alignment of Front twin steer axles to maintain parallel condition
Alignment of drive and tandem axles in multi axle trucks
Highly user-friendly Wi-Fi enabled Tablet & Mobile device to display alignment results & to operate PC from Alignment bay. Avoids multiple trips to PC console.
STANDARD ACCESSORIES
Wheel brackets(12"-24")
Jumbo 3D 6A – 12 Nos.
Jumbo 3D 5A – 10 Nos.
Jumbo 3D 4A – 8 Nos.
Target plates
Jumbo 3D 6A – 12 Nos.
Jumbo 3D 5A – 10 Nos.
Jumbo 3D 4A – 8 Nos.
Rotary Plates – .
(7 ton) with Spacers
Jumbo 3D 6A – 4 Nos.
Jumbo 3D 5A – 4 Nos.
Jumbo 3D 4A – 4 Nos.
Steering Lock
Jumbo 3D 6A – 1 No.
Jumbo 3D 5A – 1 No.
Jumbo 3D 4A – 1 No.
Brake Pedal Lock
Jumbo 3D 6A – 1 Nos
Jumbo 3D 5A – 1 No.
Jumbo 3D 4A – 1 No.
PC console with Windows
10 IoT, Key board & Mouse
Jumbo 3D 6A – 1 No.
Jumbo 3D 5A – 1 No.
Jumbo 3D 4A – 1 No.
LED monitor (21.5")
HDMI / DP interface
Jumbo 3D 6A – 1 No.
Jumbo 3D 5A – 1 No.
Jumbo 3D 4A – 1 No.
LED monitor secondary
(21.5") HDMI / DP interface
Jumbo 3D 6A – 1 No.
Jumbo 3D 5A – 1 No.
Jumbo 3D 4A – 1 No.
Wheel stoppers
Jumbo 3D 6A – 2 Nos.
Jumbo 3D 5A – 2 Nos.
Jumbo 3D 4A – 2 Nos.
Truck alignment &
Data manager software
Jumbo 3D 6A – 1 No.
Jumbo 3D 5A – 1 No.
Jumbo 3D 4A – 1 No.
Target stands
Jumbo 3D 6A – 3Tx4 Nos.
Jumbo 3D 5A – 3Tx2 & 2Tx2 Nos.
Jumbo 3D 4A – 2Tx4 Nos.
Chain Block with Ratchet
(Rear single axle adjuster)
Jumbo 3D 6A – 1 No.
Jumbo 3D 5A – 1 No.
Jumbo 3D 4A – 1 No.
Steering lock (LCV)
Jumbo 3D 6A – 1 No.
Jumbo 3D 5A – 1 No.
Jumbo 3D 4A – 1 No.
Brake pedal lock (LCV)
Jumbo 3D 6A – 1 No.
Jumbo 3D 5A – 1 No.
Jumbo 3D 4A – 1 No.
Front target plate
extension spacer 150 mm long
Jumbo 3D 6A – 6 Nos.
Jumbo 3D 5A – 6 Nos.
Jumbo 3D 4A – 6 Nos.
Adaptor for rim locking
pins with storage box
Jumbo 3D 6A – 12 Nos.
Jumbo 3D 5A – 40 Nos.
Jumbo 3D 4A – 32 Nos.
Optional ACCESSORIES
Wheel bracket extension adaptors upto 30”
Jumbo 3D 6A – 48 Nos.
Jumbo 3D 5A – 40 Nos.
Jumbo 3D 4A – 32 Nos.
Rotary plate ramp
Jumbo 3D 6A – 6 Nos.
Jumbo 3D 5A – 6 Nos.
Jumbo 3D 4A – 6 Nos.
Frame reference gauge
Jumbo 3D 6A – 1 No.
Jumbo 3D 5A – 1 No.
Jumbo 3D 4A – 1 No.
Frame offset gauge
Jumbo 3D 6A – 1 No.
Jumbo 3D 5A – 1 No.
Jumbo 3D 4A – 1 No.
Tyre dia guage
Jumbo 3D 6A – 1 No.
Jumbo 3D 5A – 1 No.
Jumbo 3D 4A – 1 No.
Drawbar gauge
(Full trailer)
Jumbo 3D 6A – 1 No.
Jumbo 3D 5A – 1 No.
Jumbo 3D 4A – 1 No.
4 shaft Calibration kit
Jumbo 3D 6A – 12 Nos.
Jumbo 3D 5A – 40 Nos.
Jumbo 3D 4A – 32 Nos.
Extension spacer (600 mm) Jumbo 3D 6A – 4 Nos.
Jumbo 3D 5A – 4 Nos.
Jumbo 3D 4A – 4 Nos.
Double end rim locking
pins (Steel rims)
Jumbo 3D 6A – 48 Nos.
Jumbo 3D 5A – 40 No2.
Jumbo 3D 4A – 32 Nos.
Double end rim locking pins
(Low profile Steel rims)
Jumbo 3D 6A – 48 Nos.
Jumbo 3D 5A – 40 Nos.
Jumbo 3D 4A – 32 No2.
Double end rim locking pins
(Long bolt rims)
Jumbo 3D 6A – 48 Nos.
Jumbo 3D 5A – 40Nos.
Jumbo 3D 4A – 32 Nos.
CVT (Constant voltage
transformer) 1KVA
Jumbo 3D 6A – 1 No.
Jumbo 3D 5A – 1 No.
Jumbo 3D 4A – 1 No.
Drive Thru’ kit
Jumbo 3D 6A – 1 No.
Jumbo 3D 5A – 1 No.
Jumbo 3D 4A – 1 No.
Wheel off Camber
adjustment kit (LCV)
Jumbo 3D 6A – 1 No.
Jumbo 3D 5A – 1 No.
Jumbo 3D 4A – 1 No.
Printer
Jumbo 3D 6A – 1 No.
Jumbo 3D 5A – 1 No.
Jumbo 3D 4A – 1 No.
Technical Specification
Measurement Paraments | Range | Accuracy |
---|---|---|
Camber (Front / Rear) | ± 15° 00' | ± 00° 02' |
Caster | ± 28° 00' | ± 00° 05' |
Kingpin Inclination | ± 25° 00' | ± 00° 05' |
Teo (Front/Rear) | ± 20° 00' | ± 00° 02' |
Total Toe | ± 40° 00' | ± 00° 04' |
Setback (Front / Rear ) | ± 25 mm | ± 2 mm |
Scrub / Thrust Angle | ± 10° 00' | ± 00° 02' |
Runout | ± 10° 00' | ± 00° 02' |
Included Angle | ± 40° 00' | ± 00° 05' |
Track width | Actual | ± 2 mm |
Power Supply (wheel Aligner) | 230V, 50Hz / 110V AC, 60Hz | |
Power | 250 W | Operating temperature | 0°-50°C |